Sr Stick Repair Kit

What is it?

A patent pending, easy to use Do-It-Yourself hockey stick repair kit for repairing the shaft of most intermediate and senior composite hockey sticks. Fixes most goalie stick shafts too! Don't throw away your broken stick, Fix Ur Stick!

Will it work for you?

To determine if your broken composite hockey stick is a good candidate for repair using the DIY Stick Repair Kit the location of the repair must be in the hollow shaft area of your hockey stick. THE BLADE AND THE SHAFT NEAR THE BLADE IS NOT REPAIRABLE USING THIS REPAIR SYSTEM.

 How to order?

The inside diameter of most composite sticks are very similar in size but there are slight differences. To determine which of the DIY Stick Repair System “kit” sizes will work best for you just follow these 3 simple steps:

1. Make two straight cuts across your broken stick shaft. One below (A) and one above (B) the broken area. Cut as little off the shaft as possible but be sure to cut and remove all of the broken area. Usually this is an area of 1 to 2 inches in total length.
   
2. Carefully measure and record the inside diameter (ID) of the cleanly cut shaft opening closest to the blade (lower shaft). Your measurement should be made in millimeters (mm). Record your measurement to the closest one-half (.5) millimeter. Use this measurement to select which DIY Repair System “kit” to order. CLICK HERE FOR A QUICK VIDEO SHOWING YOU HOW TO MEASURE THE INSIDE DIAMETER OF YOUR BROKEN STICK SHAFT
   
3. Select the repair kit size that most closely matches your measurement and place your order below:

Frequently Asked Questions (FAQ)